[Bug Report] YSR-MINI-01_dimmer: state not reported on manual control

[RtoRoc]

What happened?

The YSR-MINI-01_dimmer device integrates correctly into Zigbee2MQTT and Home Assistant. It works perfectly when I control it via Home Assistant (on, off, brightness).

However, when I physically press the button on the device to turn it on or off, the state change is not reported to Zigbee2MQTT. As a result, the state in Home Assistant does not update and remains stuck in its previous state.

No messages appear in the Zigbee2MQTT logs when the device is operated manually.

What did you expect to happen?

When the device is manually operated, it should send a state report to Zigbee2MQTT. In the Z2M logs, a message indicating the state change (on or off) is expected to appear, and the device's state in Home Assistant should be updated accordingly.

How to reproduce it (minimal and precise)

Pair the YSR-MINI-01_dimmer device with Zigbee2MQTT.
Access the Zigbee2MQTT web interface and open the log section.
Use the physical button on the device to turn it on and off multiple times.
You will observe that no messages appear in the Zigbee2MQTT logs during this manual operation.

Zigbee2MQTT version

2.5.1

Adapter firmware version

20240710

Adapter

ZStack3x0

Setup

I'm running the Zigbee2MQTT add-on on Home Assistant.

Device database.db entry

No response

Debug log

No response

[Koenkk]

Fixed!

Changes will be available in the dev branch on Sunday and in the next release which is every 1st of the month.

[RtoRoc]

Fixed!

Changes will be available in the dev branch on Sunday and in the next release which is every 1st of the month.

Thank you very much for the quick fix! I really appreciate it.

I have updated my Zigbee2MQTT to the latest version, but the issue with the YSR-MINI-01_dimmer is still present.

Since the release schedule is the 1st of every month, I am just wondering if the fix was included in the August 1st release or if I should wait for the next release on September 1st.

Thank you again for your help and great work!

[Koenkk]

I forgot to mention that you need to reconfigure the device by pressing they yellow refresh button on the frontend device page, note that it is not included in the 1 August release.

[github-actions]

This issue is stale because it has been open 60 days with no activity. Remove stale label or comment or this will be closed in 7 days

[RtoRoc]

I have a similar issue with a different device: ZB-RGBCW, which is a Zigbee RGB+CCT LED strip controller (not a bulb).

• Device works fine when controlled via Zigbee2MQTT/Home Assistant (ON/OFF, brightness, color, temp).
• When using the physical buttons on the controller, no state or brightness changes are reported in Zigbee2MQTT logs.
• Home Assistant remains stuck in the previous state.
• Zigbee2MQTT version: 2.8.0
• Documentation: https://www.zigbee2mqtt.io/devices/ZB-RGBCW.html

It seems this device also does not send state reports when operated manually, similar to YSR-MINI-01.